Metallography Specimen Mounting Press (Manual)

Metallography specimen mounting press is suitable for the thermohardening plastic pressing of the small metallography specimen which is not idiomorphic or hard to take. After forming, it will be very easy to process the grinding, polishing of the specimen and it is also convenient to process measuring of metallographic structure under metallographic microscope. The machine may work stablely under the following working condition:

1、The temperature of surrounding medium can not be less than 10 °C  and more than 40 °C;
2、The relative humidity of air should be no more than 85% (20 °C);
3、There should be no obvious vibration source around;
4、There should be no current conducting dust, explosive and corrosive air.

Technical specifications

1. Diameter of specimen: Ø22×15mm, Ø30×15mm, Ø45×18mm
2. Heater: 650W, 220V
3. Temperature adjusting range: 100-180 ºC
4. Control power supply: 220V 50Hz. The voltage fluctuation should be no more than 15%.
5. Dimensions: 34 × 27 × 40 cm
6. Net weight: 33Kg

スーパーコピー財布 スーパーコピー時計 スーパーコピーブランド cheap valentino cheap air jordans