Introduction: The Long Travel Extensometer is a precise device for measuring strain in highly extensible materials such as elastomers, semi-rigid plastics and films. Designed for use with electromechanical testing machine, and used to measure specimens elongation’s up to 800 mm. The high elongation extensometer is designed to clamp directly onto to a...

Introduction: The electronic extensometers made according to resistance strain principle, and have YYU, YYJ two series.It has legerity structure, good stability and easy to operate. Have became the essential sensor for strain automatic testing and been widely used in various academies, scientific research institutes, factories,...

Characteristics and Usage: The machine is used for cutting rubber, plastic cement, leather and other special materials into all kinds of standard sample with air pressure. It can also work as small punch press. Technical Parameters: 1. Stroke: 20–60mm 2. Working Platform Specification: 260mm×230mm 3. Shape Size: 380mm×260mm×590mm 4. Working air...

Characteristics and Usage: The machine is used for cutting rubber, plastic cement, leather and other special materials into all kinds of standard sample. It can also work as small punch press. Technical Parameters: 1. Stroke: >25mm 2. Working Platform Specification: 320mm×228mm 3. Shear Specification: according to requirements of user or standard (selective...

Characteristics and Usage: Suitable for mixing, tabletting, plasticating and heating. Compact structure, artistic model, it is convenient to operate. Technical Parameters: 1. Roll Surface Length: 160mm 2. Roll Surface Diameter: 320mm 3. Roll Surface Speed Ratio: 1:1.2 4. Front Roll Speed: 8.03 m/min 5. Rear Roll Speed : 9.8 m/min 6. Friction ratio: 1:1.35 7....

Characteristics and Usage: Suitable for the vulcanization of rubber products, the compression of thermoset plastics and insulate products. The machine has automatic control device of pressure, time and temperature, can achieve matched mould boost, timing work cycle. It can make up pressure automatically to ensure the quality of products. The structure is...

Characteristics and Usage: DIN abrasion tester, is used for testing wearing resistance of rubber tire, rubber shoes and rubber belt to identify quality of rubber products. Rubber materials carry on friction with gauze under the effect of load during test, in order to test abrasion value of sample within the set range. It complies with ISO4649, DIN53516, GB9867...

Characteristics and Usage: The machine complies with ASTM D5289, ISO6502, GB T16584 ‘Rubber—Moving Die Rheometer to Test Vulcanizing Characteristic’ requirement, ISO6520 requirement and standard requirement of T10, T30, T50, T60, T90 data. The machine is used for testing characteristics of unvulcanized rubber, and finds the best time for vulcanizing of...

Characteristics and Usage: The machine complies with ASTM-D1646, ISO-289, JSC-k6300, GB/T 1232 ‘Test for Mooney Viscosity of Unvulcanized Rubber’ & Test for Early Vulcanizing Characteristics of Rubber Mooney Viscometer Law’, Mooney Viscosity used for testing nature rubber and gross rubber in viscosity, premature cure, vulcanization value and so on....

Metallography specimen cutting machine can be used to cut various metal and non-metal materials so as to get specimen and observe the metallography or lithofacies structure. The equipped cooling system can clear up the heat produced during cutting so that  it will avoid the metallography or lithofacies structure deforming of specimen because of heating...