JG-6004 Mooney Viscometer

JG-6004 Mooney Viscometer

Equipment Usage JG-6004 Mooney Viscometer is suitable for the determination of various kinds of unvulcanized natural rubber, synthetic rubber and reclaimed rubber Mooney viscosity, the scorch time and curing index. Features High precision sensors: 0 ~ 200 Mooney values. Mooney accuracy is within ±0.5 Mooney values. Resolution: 1/10 Mooney values. Control...

JG-6002 Rotorless Rheometer

JG-6002 Rotorless Rheometer

Equipment Usage JG-6002 Rotorless Rheometer is suitable for the determination of rubber shear modulus changes during the process of sulfide, and the shear modulus is proportional to the crosslink density, so the determination results reflected the rubber crosslinking degree of change in the process of vulcanization, rubber vulcanization rate can be detected and...

Ultrasonic Thickness Gauge

Ultrasonic Thickness Gauge

FEATURE Capable of performing measurements on a wide range of material, including metals, plastic, ceramics, composites, epoxies, glass and other ultrasonic wave well-conductive materials. Transducer models are available for special application, including for coarse grain material and high temperature applications. Two-Point Calibration function. Two work...

Wire Elongation Tester

Product Explanation: This tester is used to test the elongation of conductor. It is designed and manufactured to meet the requirements of many standards such as UL1581, ASTM B 557, ASTM B 566 and so on. Features: This machine will stop automatically when the test conductor broke down. Elongation of test conductor will count automatically and displayed by a...

Rubber Mixing Machine (2 Roll Mill)

Rubber Mixing Machine (2 Roll Mill)

Characteristics and Usage: Suitable for mixing, tabletting, plasticating and heating. Compact structure, artistic model, it is convenient to operate. Technical Parameters: 1. Roll Surface Length: 160mm 2. Roll Surface Diameter: 320mm 3. Roll Surface Speed Ratio: 1:1.2 4. Front Roll Speed: 8.03 m/min 5. Rear Roll Speed : 9.8 m/min 6. Friction ratio: 1:1.35 7....

Hot Molding Press Machine

Hot Molding Press Machine

Characteristics and Usage: Suitable for the vulcanization of rubber products, the compression of thermoset plastics and insulate products. The machine has automatic control device of pressure, time and temperature, can achieve matched mould boost, timing work cycle. It can make up pressure automatically to ensure the quality of products. The structure is...

DIN Abrasion Tester

DIN Abrasion Tester

Characteristics and Usage: DIN abrasion tester, is used for testing wearing resistance of rubber tire, rubber shoes and rubber belt to identify quality of rubber products. Rubber materials carry on friction with gauze under the effect of load during test, in order to test abrasion value of sample within the set range. It complies with ISO4649, DIN53516, GB9867...

Moving Die Rheometer

Characteristics and Usage: The machine complies with ASTM D5289, ISO6502, GB T16584 ‘Rubber—Moving Die Rheometer to Test Vulcanizing Characteristic’ requirement, ISO6520 requirement and standard requirement of T10, T30, T50, T60, T90 data. The machine is used for testing characteristics of unvulcanized rubber, and finds the best time for vulcanizing of...

Mooney Viscometer

Mooney Viscometer

Characteristics and Usage: The machine complies with ASTM-D1646, ISO-289, JSC-k6300, GB/T 1232 ‘Test for Mooney Viscosity of Unvulcanized Rubber’ & Test for Early Vulcanizing Characteristics of Rubber Mooney Viscometer Law’, Mooney Viscosity used for testing nature rubber and gross rubber in viscosity, premature cure, vulcanization value and so on....

スーパーコピー財布 スーパーコピー時計 スーパーコピーブランド cheap valentino cheap air jordans